LEER Tacoma Bed Cap – Secure, Weather-Tight Truck Bed Protection
Our LEER Tacoma bed cap transforms your truck bed into a secure, weather-tight storage vault that blends seamlessly with your Toyota’s factory lines. Engineered to match the OEM contour of 2005–2024 Tacoma models, this fiberglass cap features paintable gel-coat finish, automotive-grade weatherstripping, and lockable rear doors with integrated glass hatches.
Whether you’re securing job-site tools, camping gear, or weekend cargo, the LEER cap offers walk-in convenience through a carpeted interior with LED dome lighting. We designed every seal and hinge to withstand highway speeds and extreme weather, giving you the confidence to load valuable equipment and drive without worry.
- Custom-molded fiberglass shell fits 2005–2024 Tacoma 5′ and 6′ beds
- Paintable gel-coat finish matches factory or custom paint
- Lockable rear barn doors with tinted slider windows and built-in defrost
- Stainless-steel rotary latches and automotive weatherstripping create dust-proof seal
- Pre-wired LED dome light with rocker switch
Construction & Durability
We mold every LEER cap from compression-formed fiberglass that mirrors the structural integrity found across our full range of truck bed caps for commercial and recreational use. The outer shell receives a UV-resistant gel-coat that you can paint to match your Tacoma’s factory color or leave in the standard white or black finish.
Stainless-steel piano hinges span the full width of the rear opening, distributing stress evenly when you swing the barn doors open under load. Automotive-grade bulb weatherstripping lines every edge—roof, sides, and rear—creating a compression seal that blocks rain, dust, and road spray even at highway speeds. We reinforce the roof with internal ribs to support aftermarket roof racks up to 300 pounds static load.
Locking Security & Access
Rotary Latch System
The rear barn doors lock via stainless-steel rotary latches that engage strike plates recessed into the cap shell. Each door operates independently, and both key cylinders match your Tacoma’s factory ignition key when ordered through a Toyota dealer integration program.
Slider Window Operation
Tinted slider windows in each rear door glide on nylon tracks, giving you ventilation without compromising security. The sliders lock from inside with a cam lever, and the rear glass includes electric defrost elements wired to your truck’s rear-window circuit for cold-weather visibility.
Interior Features & Lighting
We carpet the interior sidewalls and headliner with automotive-grade loop fabric that dampens road noise and prevents cargo from scratching your truck bed’s paint. The ceiling-mounted LED dome light draws power from your cab’s courtesy circuit, activating automatically when you open the rear doors or toggling manually via a rocker switch near the latch.
The floor remains open to your truck bed’s factory tie-down rails and bed liner, so you retain full use of cargo nets, D-rings, and bed dividers. We also pre-drill drain channels along the bottom edge of the shell to route any condensation or wash water out through the tailgate seam.
More Toyota Bed Caps & Tonneau Covers
What people are saying
Common Questions About the LEER Tacoma Bed Cap
Yes, the LEER cap is custom-molded for both 2005–2024 Tacoma short beds (60.5 inches) and long beds (73.7 inches). When you place your order, specify your bed length and cab style so we ship the correct front-edge contour to match your cab’s rear window slope.
Absolutely. The gel-coat finish is designed to accept automotive paint. We recommend wet-sanding with 400-grit paper, applying two coats of primer, and finishing with your truck’s OEM paint code in base coat plus clear coat. Most body shops complete the job in one day.
When you order through a Toyota dealer integration program, we can key the rotary latches to match your factory ignition. If you order direct, the cap ships with two unique keys, and you can have a locksmith rekey the cylinders to match your truck.
The reinforced fiberglass roof supports up to 300 pounds of static load when you install aftermarket crossbars at the factory-designed mounting points. We do not recommend dynamic loads (driving with cargo on the roof) above 150 pounds to preserve the shell’s structural integrity.
No drilling is necessary. The mounting clamp system bolts through existing factory holes in your Tacoma’s bed rail. You simply position the cap, align the clamps, and torque the bolts to 18 ft-lbs. The rubber-lined clamps prevent vibration and protect your bed rail’s finish.
Yes, the LED dome light connects to your cab’s courtesy-light circuit using a quick-connect harness. The light activates automatically when you open the rear doors or toggles manually via a rocker switch mounted near the latch inside the cap.
Yes, the cap’s open floor design preserves full access to your factory tie-down rails, D-rings, and bed liner. You can secure cargo nets, dividers, and sliding trays exactly as you would without the cap, and the carpeted sidewalls protect your bed’s paint during loading.